Bose 10 inch Flat Refoam Kit (F10-10)


Fits 501 series I and II.
FLAT attachment to the cone.
A – O.D. of the surround = 9.75″
B – Roll ends = 8.625″
C – O.D. of the cone = 7.625″
D – I.D. of the surround = 7.125″


Bose 10″ Refoam Kit

This kit will fit many Bose 10″ speaker models that have a FLAT attachment to cone.  The original Bose paper dust caps are 2.125″ in diameter, are tall and have a flat top.  You can cut them off to shim the voice coil and re-use the dust caps or replace them with new generic paper dust caps.
Check for correct dimensions.

Model #’s include:
– 501 series I, series II and more.

Each Refoam Kit includes all the materials needed to repair two (2) woofers:
– Refoaming Instructions
– 2 Foam Surrounds
– Shims For Centering the 1.5″ Voice Coils (if selected)
– 2 Dust Caps (if selected)
– 1 Bottle of Specially Formulated Foam Surround Adhesive

*It can be difficult to refoam a speaker without removing the dust cap and inserting the plastic shims. The plastic shims are used to center the voice coil and cone assembly while the speaker is being refoamed. If you do not use the plastic shims, the voice coil may be off center and it may lead to the voice coil rubbing.

A – Outside diameter of the surround = 9.75″
B – Roll ends = 8.625″
C – Roll starts / O.D. of the cone = 7.625″
D – Inside diameter of the surround = 7.125″
FLAT attachment to the cone

Item added to wishlist View Wishlist
Item removed from wishlist