MW Audio MT-4003: 1 inch Polyester Dome Tweeter
Good overall sounding tweeter for any home audio application.
4 ohm: Is a good replacement for some CV tweeters, but the screw mounting holes are spaced out a little smaller. You can widen the holes a little bit, then you can mount the CV mounting face plate to this tweeter.
CV Tweeter Part #’s:
– TWTH00004 and TWTH00010
8 ohm: ***Great replacement for the high output polycell tweeter used in many Infinity Studio Monitor speakers. Face plate and screw holes line up perfect, but you will have to file/route the cabinet for the terminals. The terminals are on opposite sides of the magnet instead being next to each other. On some cabinets, you may also need to file/route the opening about 1/16″ for the magnet.
See pictures.
Infinity Studio Monitor models:
– SM-80, SM-82, SM-85, SM-100, SM-102, SM-105, SM-112, SM-115, SM-120, SM-122, SM-125, SM-150, SM-152, SM-155 and many more
Infinity tweeter part #’s:
– 902-4270, 902-2638, 902-6688 and more
Also, a great replacement for these:
– Philips AD 0160/T8, AD 0162, AD 0163 and more
– Polk Audio tweeters
– DLK Model 3 and 4 speakers
Specs:
Freq Range: 1500-20,000 Hz
Fs: 1350 Hz
Power Rating: 50 Watts
Impedance: 4 or 8 ohms
Re: 3.6 or 6.8 ohms
Sensitivity: 93 dB
Voice Coil Diameter: 1″ (25mm)
Magnet Weight: 228g
Dimensions:
Outside: 3.7″ (94mm)
Cutout: 2.76″ (70mm)
