Eminence N210T Bolt-on Compression Driver
Available in 8 or 16 ohms
Perhaps the most copied diaphragm of all time. There’s a reason this dome has been going strong for over 30 years. It’s unique tange-radial ribbed surround formed from pure Titanium has truly stood the test of time like few other devices in the pro sound industry. A 2” workhorse voice coil helps with high power handling and a lower cutoff frequency yet somehow crammed in a tiny neo motor with a total weight less than 2lbs. Fast-on terminal spades yield quick-connect and/or solderability. A rugged die cast aluminum heat sink back cover adds to the facts that the N210T is a testament to performance and reliability. Now you can embrace what many of the Pros have been using.
Yamaha uses this driver in the DSR112, DSR115 and DSR215 speakers.
Click Here to Download PDF Spec Sheet
8 ohm:
| SPECIFICATION | |
| Throat Size | 1″, 25.4mm |
| Nominal Impedance* | 8Ω |
| Minimum Impedance | 8.6 ohm @ 5.7 kHz |
| Power Rating** | 50 W (AES) |
| Resonance | 0.599 kHz |
| Usable Frequency Range | 1.5kHz-20kHz |
| Recommended Crossover | 1.5kHz / 12 dB kHz |
| Sensitivity*** | 108.5 |
| Magnet Material | Neodymium |
| Magnet Weight | 4.16oz, 0.31kg |
| Voice Coil Diameter | 2″ / 50.8mm |
| Voice Coil Former | Polyimide |
| Diaphragm Material | Titanium |
| DC Resistance (Re) | 6.7 Ω |
| MOUNTING INFORMATION | |
| Overall Diameter | 3.85″, 97.8mm |
| Driver Volume Displaced | 0.008 cu.ft., 0.22 liters |
| Depth | 1.58″, 40.2mm |
| Weight | 1.97 lbs, .89 kg |
| Mounting Thread | N/A |
| Mounting Holes Diameter | 2X 1/4-20 |
| Mounting Holes B.C.D. | 3 in. 76.2 mm |
| Bolt-on | |
| SPECIFICATION | |
| Throat Size | 1″, 25.4mm |
| Nominal Impedance* | 16Ω |
| Minimum Impedance | 16.1 ohm @ 5.7 kHz |
| Power Rating** | 50 W (AES) |
| Resonance | 0.599 kHz |
| Usable Frequency Range | 1.5kHz-20kHz |
| Recommended Crossover | 1.5kHz / 12 dB kHz |
| Sensitivity*** | 108.5 |
| Magnet Material | Neodymium |
| Magnet Weight | 4.16oz, 0.31kg |
| Voice Coil Diameter | 2″ / 50.8mm |
| Voice Coil Former | Polyimide |
| Diaphragm Material | Titanium |
| DC Resistance (Re) | 12.9 Ω |
| MOUNTING INFORMATION | |
| Overall Diameter | 3.85″, 97.8mm |
| Driver Volume Displaced | 0.008 cu.ft., 0.22 liters |
| Depth | 1.58″, 40.2mm |
| Weight | 1.97 lbs, .89 kg |
| Mounting Thread | N/A |
| Mounting Holes Diameter | 2X 1/4-20 |
| Mounting Holes B.C.D. | 3 in. 76.2 mm |
