Sale!

Eminence MAVERICK: 12 inch FDM Guitar Speaker

Price: $139.99 $129.99

The Eminence Maverick guitar speaker with patent-pending FDM technology puts tonal control at your fingertips. Simply adjust the knob on the back of the speaker to attenuate volume while creating an over driven, saturated tube tone.
75 watts / 80-5000Hz / 1.75″ voice coil
8 ohms

Description

Eminence MAVERICK: 12 inch Guitar FDM Speaker

Click Here to Download 8 ohm PDF Spec Sheet

Eminence engineers have collaborated to introduce a simple, affordable, yet revolutionary technology to mechanically manipulate the flux path and relative densities within a loudspeaker motor structure. The result is a patent-pending innovation lending guitarists the ability to achieve high power amplifier tone at lower volumes simply with the turn of a dial on the back of the speaker. This revolutionary, all-analog technology puts a new twist on guitar tone. Just turn the modulator knob to adjust speaker output and amplifier interaction, helping you find that sweet spot of saturated tube tone but at a significantly lower volume. Tweak the knob for a wide range of tones: More attenuation affords a warmer tone while less attenuation restores volume and brightness. It’s like switching amps in the middle of the set. You get real attenuation without losing the “feel” of playing through a speaker. No pedals or expensive electronics – just a speaker, from Eminence. Available in both the Patriot® and Red Coat® lines of Eminence guitar speakers, the Maverick™ and ReignMaker™ models each put tonal control at your fingertips.

The Eminence Maverick guitar speaker with patent-pending FDM technology puts tonal control at your fingertips. Simply adjust the knob on the back of the speaker to attenuate volume while creating an overdriven, saturated tube tone.

SPECIFICATION
Nominal Basket Diameter 12″, 305 mm
Nominal Impedance* 8 Ω
Power Rating**
Watts 75 W
Music Program N/A
Resonance 82 Hz
Usable Frequency Range 80 Hz – 5 kHz
Sensitivity*** 99.5 dB
Magnet Weight 38 oz.
Gap Height 0.312″, 7.9 mm
Voice Coil Diameter 1.75″, 44 mm
THIELE & SMALL PARAMETERS – MAX ATTENUATION
Resonant Frequency (fs) 89 Hz
DC Resistance (Re) 12.06 Ω
Coil Inductance (Le) 0.76mH
Mechanical Q (Qms) 16.33
Electromagnetic Q (Qes) 9.53
Total Q (Qts) 6.02
Compliance Equivalent Volume (Vas) 41.21 liters
Peak Diaphragm Displacement Volume (Vd) 24.42 cc
Mechanical Compliance of Suspension (Cms) 0.11 mm/N
BL Product (BL) 4.48 T-M
Diaphragm Mass Inc. Airload (MMs) 28.3 grams
Efficiency Bandwidth Product (EBP) 9.34
Maximum Linear Excursion (Xmax) .047 mm
Surface Area of Cone (Sd) 519.5 cm2
Maximum Mechanical Limit (Xlim) N/A
THIELE & SMALL PARAMETERS – FULL OUTPUT
Resonant Frequency (fs) 82 Hz
DC Resistance (Re) 5.99 Ω
Coil Inductance (Le) 0.48m H
Mechanical Q (Qms) 16.77
Electromagnetic Q (Qes) 1.17
Total Q (Qts) 1.09
Compliance Equivalent Volume (Vas) 48.71 liters / 1.72 cu.ft.
Peak Diaphragm Displacement Volume (Vd) 24.4 cc
Mechanical Compliance of Suspension (Cms) 0.13 mm/N
BL Product (BL) 8.71 T-M
Diaphragm Mass Inc. Airload (MMs) 28 grams
Efficiency Bandwidth Product (EBP) 71
Maximum Linear Excursion (Xmax) 0.47 mm
Surface Area of Cone (Sd) 519.5 cm2
Maximum Mechanical Limit (Xlim) N/A
MOUNTING INFORMATION
Recommended Enclosure Volume
Sealed N/a
Vented Acceptable
Driver Volume Displaced 0.078 cu.ft. / 2.2 liters
Overall Diameter 12.03″, 305.6 mm
Baffle Hole Diameter 11.07″, 281.2 mm
Front Sealing Gasket Yes
Rear Sealing Gasket Yes
Mounting Holes Diameter 0.25″, 6.4mm
Mounting Holes B.C.D. 11.59″, 294.4mm
Depth 6.56″, 166.7 mm
Net Weight 7.8 lbs, 3.54 kg
Shipping Weight 9.7 lbs, 4.4 kgs
MATERIALS OF CONSTRUCTION
Coil Construction Copper voice coil
Coil Former Polyimide former
Magnet Composition Ferrite magnet
Core Details FDM Technology
Basket Materials Pressed steel basket
Cone Composition Paper cone
Cone Edge Composition Paper cone edge
Dust Cap Composition Zurette dust cap
0/5 (0 Reviews)