Sale!

Eminence MAVERICK: 12 inch Guitar FDM Speaker

Price: $129.99 $119.99

Tweak the knob for a wide range of tones: More attenuation affords a warmer tone while less attenuation restores volume and brightness.
75 watts / 75-5.2kHz / 1.75″ voice coil
8 ohms

Description

Eminence MAVERICK: 12 inch Guitar FDM Speaker

Click Here to Download 8 ohm PDF Spec Sheet

NLA

Click Here to Download 16 ohm PDF Spec Sheet

Eminence engineers have collaborated to introduce a simple, affordable, yet revolutionary technology to mechanically manipulate the flux path and relative densities within a loudspeaker motor structure. The result is a patent-pending innovation lending guitarists the ability to achieve high power amplifier tone at lower volumes simply with the turn of a dial on the back of the speaker. This revolutionary, all-analog technology puts a new twist on guitar tone. Just turn the modulator knob to adjust speaker output and amplifier interaction, helping you find that sweet spot of saturated tube tone but at a significantly lower volume. Tweak the knob for a wide range of tones: More attenuation affords a warmer tone while less attenuation restores volume and brightness. It’s like switching amps in the middle of the set. You get real attenuation without losing the “feel” of playing through a speaker. No pedals or expensive electronics – just a speaker, from Eminence. Available in both the Patriot® and Red Coat® lines of Eminence guitar speakers, the Maverick™ and ReignMaker™ models each put tonal control at your fingertips.

Specs:

Nominal Basket Diameter 12″, 304.8 mm

Nominal Impedance* 8 ohms

Power Rating Watts 75W

Music Program N/A

Resonance 82.45 Hz

Usable Frequency Range 75 Hz- 5.2 kHz

Sensitivity*** 91.5 dB (No knob turn), 100 dB (Full turn)

Magnet Weight 38 oz.

Gap Height 0.312″, 7.92 mm

Voice Coil Diameter 1.75″, 44.5 mm

Thiele & Small Parameters:

No Turn of the Knob : Full Turn of the Knob

Resonant Frequency (fs) 82.6 Hz : 82.45 Hz

DC Resistance (Re) 5.96 : 5.99

Coil Inductance (Le) 0.38 mH : 0.48 mH

Mechanical Q (Qms) 16.26 : 16.77

Electromagnetic Q (Qes) 6.16 : 1.17

Total Q (Qts) 4.47 : 1.09

Compliance Equivalent Volume (Vas) 48.71 liters : 48.71 liters

Mechanical Compliance of Suspension (Cms) 0.13 mm/N : 0.13 mm/N

BL Product (BL) 3.76 T-M : 8.71 T-M Diaphram Mass inc.

Airload (Mms) 28.2 grams : 28.5 grams

Efficiency Bandwidth Product (EBP) 13.4 : 70.73

Maximum Linear Excursion (Xmax) 0.47 mm : 0.47 mm

Surface Area of Cone (Sd) 519.5 cm2 : 519.5 cm2

Maximum Mechanical Limit (Xlim) N/A

Mounting Information:

Recommended Enclosure

Sealed N/A

Vented Acceptable

Driver Volume Displaced 134.25 cu.in., 2.2 liters

Overall Diameter 12.03″, 305.5 mm

Baffle Hole Diameter 10.95″, 278.1 mm

Front Sealing Gasket Yes

Rear Sealing Gasket Yes

Mounting Holes Diameter 0.25″, 6.4 mm

Mounting Holes B.C. D. 11.59″, 294.3 mm

Depth 6.562″, 166.6 mm

Net Weight 7.8 lbs., 3.54 kg

Shipping Weight 9.7 lbs., 4.39 kg

Materials of Construction:

Coil Construction Copper Coil Former Polyimide

Magnet Composition Ferrite

Core Details FDM™ Core Technology

Basket Materials Pressed Steel

Cone Composition Full molded paper cone

Cone Edge Composition Paper cone edge

Dustcap Composition Zurette