Dynaudio 8 inch Refoam Kit (F8-9)


Fits 21W54, 21W-5406, 24W-100, 22W75, 24W75 and more.
A – O.D. of the surround = 8″
B – Roll ends = 7.375″
C – O.D. of the cone = 6.125″
D – I.D. of the surround = 5.625″


Dynaudio 8″ Refoam Kit

This kit will fit some Dynaudio 8″ speaker models that have an angled attachment to cone.
Check for correct dimensions.

Models include:
– 21W54, 21W-5406, 24W-100, 22W75, 22W-7506, 24W75 and more.

Each Refoam Kit includes all the materials needed to repair two (2) woofers:
– Refoaming Instructions
– 2 Foam Surrounds
– Shims For Centering the Voice Coils (optional)
– 2 Dust Caps (optional)
– 1 Tube of Specially Formulated Foam Surround Adhesive (strong and sticky to bond on the poly cones)

*It can be difficult to refoam a speaker without removing the dust cap and inserting the plastic shims. The plastic shims are used to center the voice coil and cone assembly while the speaker is being refoamed. If you do not use the plastic shims, the voice coil may be off center and it may lead to the voice coil rubbing. However most Dynaudio woofers we recommend NOT removing the dust cap or shimming the voice coil. The cap is hard to remove and you could damage the voice coil.

A – Outside diameter of the surround = 8″
B – Roll ends = 7.375″
C – Roll starts / O.D. of the cone = 6.125″
D – Inside diameter of the surround = 5.625″

Item added to wishlist View Wishlist
Item removed from wishlist